Training Dates

Duration: 16.0 hours
Associate Member: $320.00
Member: $260.00
Non-Member: $375.00

Duration: 8.0 hours
Associate Member: $160.00
Member: $130.00
Non-Member: $190.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Attend this presentation for the practical interpretation of changes in the law and how they affect your workplace. Effective February 1st, 2007 the new ‘omnibus’ Regulation became effective and affects every person who works in Manitoba. If you are a worker, supervisor, contractor, employer, owner or supplier, you need to know the bottom line. With the current emphasis on the construction industry, now is the time to prepare yourself: ”In the eyes of the law, not knowing is not an excuse!” A current copy of the WSH Act and new Regulation will be detailed with practical solutions to implementation will be discussed. This is a must-attend session.

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Workplace Safety and Health Legislation requires a Prime Contractor to be designated on all construction projects where more than one employer or self-employed person(s) are involved in work on site at the same time. The Prime Contractor is granted overall responsibility to ensure compliance with WSH regulations at the worksite. Worksite activities need to be coordinated so that the work of one employer does not create unsafe conditions for the workers of another employer on the site. CSAM’s Prime Contractor course will focus on providing companies with effective guidelines to assist them in fulfilling their responsibilities. This course will examine a Prime Contractor’s legislated requirements and focus on developing practical methods to meet these requirements.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $160.00
Member: $130.00
Non-Member: $190.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

This half-day seminar is designed to provide participants with the knowledge and skills to effectively manage and monitor a health and safety management system. This workshop will focus on the organization and maintenance of safety program documentation and how to implement and maintain a continuous improvement cycle.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

What’s happening on your work sites? What should you be doing? Legally, every employer must have on each of their jobsites a designated safety representative who is familiar with their legal duties and responsibilities. This workshop is specifically tailored to the roles of the site worker safety representatives. Learn guidelines and practical solutions to your legislated responsibilities for safety and health concerns on the job site. This course is typically offered at the Manitoba Construction Conference. We are incorporating this well-attended, often-requested course into our regular training schedule.

Duration: 16.0 hours
Associate Member: $320.00
Member: $260.00
Non-Member: $375.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

What’s happening on your work sites? What should you be doing? Legally, every employer must have on each of their jobsites a designated safety representative who is familiar with their legal duties and responsibilities. This workshop is specifically tailored to the roles of the site worker safety representatives. Learn guidelines and practical solutions to your legislated responsibilities for safety and health concerns on the job site. This course is typically offered at the Manitoba Construction Conference. We are incorporating this well-attended, often-requested course into our regular training schedule.

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Attend this presentation for the practical interpretation of changes in the law and how they affect your workplace. Effective February 1st, 2007 the new ‘omnibus’ Regulation became effective and affects every person who works in Manitoba. If you are a worker, supervisor, contractor, employer, owner or supplier, you need to know the bottom line. With the current emphasis on the construction industry, now is the time to prepare yourself: ”In the eyes of the law, not knowing is not an excuse!” A current copy of the WSH Act and new Regulation will be detailed with practical solutions to implementation will be discussed. This is a must-attend session.

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

This half-day seminar is designed to provide participants with the knowledge and skills to effectively manage and monitor a health and safety management system. This workshop will focus on the organization and maintenance of safety program documentation and how to implement and maintain a continuous improvement cycle.

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Workplace Safety and Health Legislation requires a Prime Contractor to be designated on all construction projects where more than one employer or self-employed person(s) are involved in work on site at the same time. The Prime Contractor is granted overall responsibility to ensure compliance with WSH regulations at the worksite. Worksite activities need to be coordinated so that the work of one employer does not create unsafe conditions for the workers of another employer on the site. CSAM’s Prime Contractor course will focus on providing companies with effective guidelines to assist them in fulfilling their responsibilities. This course will examine a Prime Contractor’s legislated requirements and focus on developing practical methods to meet these requirements.

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

What’s happening on your work sites? What should you be doing? Legally, every employer must have on each of their jobsites a designated safety representative who is familiar with their legal duties and responsibilities. This workshop is specifically tailored to the roles of the site worker safety representatives. Learn guidelines and practical solutions to your legislated responsibilities for safety and health concerns on the job site. This course is typically offered at the Manitoba Construction Conference. We are incorporating this well-attended, often-requested course into our regular training schedule.

Duration: 8.0 hours
Associate Member: $25.00
Member: $25.00
Non-Member: $25.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

This half-day seminar is designed to provide participants with the knowledge and skills to effectively manage and monitor a health and safety management system. This workshop will focus on the organization and maintenance of safety program documentation and how to implement and maintain a continuous improvement cycle.

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 8.0 hours
Associate Member: $120.00
Member: $85.00
Non-Member: $160.00

All participants receive a certificate of training and a wallet-sized card upon successful completion. Learn to think, react and improvise in emergency situations from the world leader in first aid, the Canadian Red Cross. The employer, owner, or general contractor is responsible for providing and maintaining first aid services, equipment and supplies in accordance with the first aid requirements stated in the Workplace Safety and Health Act and Regulations.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Attend this presentation for the practical interpretation of changes in the law and how they affect your workplace. Effective February 1st, 2007 the new ‘omnibus’ Regulation became effective and affects every person who works in Manitoba. If you are a worker, supervisor, contractor, employer, owner or supplier, you need to know the bottom line. With the current emphasis on the construction industry, now is the time to prepare yourself: ”In the eyes of the law, not knowing is not an excuse!” A current copy of the WSH Act and new Regulation will be detailed with practical solutions to implementation will be discussed. This is a must-attend session.

Duration: 8.0 hours
Associate Member: $160.00
Member: $130.00
Non-Member: $190.00

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 16.0 hours
Associate Member: $320.00
Member: $260.00
Non-Member: $375.00

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Workplace Safety and Health Legislation requires a Prime Contractor to be designated on all construction projects where more than one employer or self-employed person(s) are involved in work on site at the same time. The Prime Contractor is granted overall responsibility to ensure compliance with WSH regulations at the worksite. Worksite activities need to be coordinated so that the work of one employer does not create unsafe conditions for the workers of another employer on the site. CSAM’s Prime Contractor course will focus on providing companies with effective guidelines to assist them in fulfilling their responsibilities. This course will examine a Prime Contractor’s legislated requirements and focus on developing practical methods to meet these requirements.

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

What’s happening on your work sites? What should you be doing? Legally, every employer must have on each of their jobsites a designated safety representative who is familiar with their legal duties and responsibilities. This workshop is specifically tailored to the roles of the site worker safety representatives. Learn guidelines and practical solutions to your legislated responsibilities for safety and health concerns on the job site. This course is typically offered at the Manitoba Construction Conference. We are incorporating this well-attended, often-requested course into our regular training schedule.

Duration: 8.0 hours
Associate Member: $160.00
Member: $130.00
Non-Member: $190.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 16.0 hours
Associate Member: $320.00
Member: $260.00
Non-Member: $375.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Attend this presentation for the practical interpretation of changes in the law and how they affect your workplace. Effective February 1st, 2007 the new ‘omnibus’ Regulation became effective and affects every person who works in Manitoba. If you are a worker, supervisor, contractor, employer, owner or supplier, you need to know the bottom line. With the current emphasis on the construction industry, now is the time to prepare yourself: ”In the eyes of the law, not knowing is not an excuse!” A current copy of the WSH Act and new Regulation will be detailed with practical solutions to implementation will be discussed. This is a must-attend session.

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $120.00
Member: $85.00
Non-Member: $160.00

All participants receive a certificate of training and a wallet-sized card upon successful completion. Learn to think, react and improvise in emergency situations from the world leader in first aid, the Canadian Red Cross. The employer, owner, or general contractor is responsible for providing and maintaining first aid services, equipment and supplies in accordance with the first aid requirements stated in the Workplace Safety and Health Act and Regulations.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

What’s happening on your work sites? What should you be doing? Legally, every employer must have on each of their jobsites a designated safety representative who is familiar with their legal duties and responsibilities. This workshop is specifically tailored to the roles of the site worker safety representatives. Learn guidelines and practical solutions to your legislated responsibilities for safety and health concerns on the job site. This course is typically offered at the Manitoba Construction Conference. We are incorporating this well-attended, often-requested course into our regular training schedule.

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Workplace Safety and Health Legislation requires a Prime Contractor to be designated on all construction projects where more than one employer or self-employed person(s) are involved in work on site at the same time. The Prime Contractor is granted overall responsibility to ensure compliance with WSH regulations at the worksite. Worksite activities need to be coordinated so that the work of one employer does not create unsafe conditions for the workers of another employer on the site. CSAM’s Prime Contractor course will focus on providing companies with effective guidelines to assist them in fulfilling their responsibilities. This course will examine a Prime Contractor’s legislated requirements and focus on developing practical methods to meet these requirements.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 8.0 hours
Associate Member: $160.00
Member: $130.00
Non-Member: $190.00

Duration: 16.0 hours
Associate Member: $320.00
Member: $260.00
Non-Member: $375.00

Duration: 8.0 hours
Associate Member: $25.00
Member: $25.00
Non-Member: $25.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

What’s happening on your work sites? What should you be doing? Legally, every employer must have on each of their jobsites a designated safety representative who is familiar with their legal duties and responsibilities. This workshop is specifically tailored to the roles of the site worker safety representatives. Learn guidelines and practical solutions to your legislated responsibilities for safety and health concerns on the job site. This course is typically offered at the Manitoba Construction Conference. We are incorporating this well-attended, often-requested course into our regular training schedule.

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

This half-day seminar is designed to provide participants with the knowledge and skills to effectively manage and monitor a health and safety management system. This workshop will focus on the organization and maintenance of safety program documentation and how to implement and maintain a continuous improvement cycle.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $160.00
Member: $130.00
Non-Member: $190.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 16.0 hours
Associate Member: $320.00
Member: $260.00
Non-Member: $375.00

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours
Associate Member: $120.00
Member: $85.00
Non-Member: $160.00

All participants receive a certificate of training and a wallet-sized card upon successful completion. Learn to think, react and improvise in emergency situations from the world leader in first aid, the Canadian Red Cross. The employer, owner, or general contractor is responsible for providing and maintaining first aid services, equipment and supplies in accordance with the first aid requirements stated in the Workplace Safety and Health Act and Regulations.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

What’s happening on your work sites? What should you be doing? Legally, every employer must have on each of their jobsites a designated safety representative who is familiar with their legal duties and responsibilities. This workshop is specifically tailored to the roles of the site worker safety representatives. Learn guidelines and practical solutions to your legislated responsibilities for safety and health concerns on the job site. This course is typically offered at the Manitoba Construction Conference. We are incorporating this well-attended, often-requested course into our regular training schedule.

Duration: 8.0 hours
Associate Member: $160.00
Member: $130.00
Non-Member: $190.00

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Attend this presentation for the practical interpretation of changes in the law and how they affect your workplace. Effective February 1st, 2007 the new ‘omnibus’ Regulation became effective and affects every person who works in Manitoba. If you are a worker, supervisor, contractor, employer, owner or supplier, you need to know the bottom line. With the current emphasis on the construction industry, now is the time to prepare yourself: ”In the eyes of the law, not knowing is not an excuse!” A current copy of the WSH Act and new Regulation will be detailed with practical solutions to implementation will be discussed. This is a must-attend session.

Duration: 16.0 hours
Associate Member: $320.00
Member: $260.00
Non-Member: $375.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Workplace Safety and Health Legislation requires a Prime Contractor to be designated on all construction projects where more than one employer or self-employed person(s) are involved in work on site at the same time. The Prime Contractor is granted overall responsibility to ensure compliance with WSH regulations at the worksite. Worksite activities need to be coordinated so that the work of one employer does not create unsafe conditions for the workers of another employer on the site. CSAM’s Prime Contractor course will focus on providing companies with effective guidelines to assist them in fulfilling their responsibilities. This course will examine a Prime Contractor’s legislated requirements and focus on developing practical methods to meet these requirements.

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

What’s happening on your work sites? What should you be doing? Legally, every employer must have on each of their jobsites a designated safety representative who is familiar with their legal duties and responsibilities. This workshop is specifically tailored to the roles of the site worker safety representatives. Learn guidelines and practical solutions to your legislated responsibilities for safety and health concerns on the job site. This course is typically offered at the Manitoba Construction Conference. We are incorporating this well-attended, often-requested course into our regular training schedule.

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Attend this presentation for the practical interpretation of changes in the law and how they affect your workplace. Effective February 1st, 2007 the new ‘omnibus’ Regulation became effective and affects every person who works in Manitoba. If you are a worker, supervisor, contractor, employer, owner or supplier, you need to know the bottom line. With the current emphasis on the construction industry, now is the time to prepare yourself: ”In the eyes of the law, not knowing is not an excuse!” A current copy of the WSH Act and new Regulation will be detailed with practical solutions to implementation will be discussed. This is a must-attend session.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

This half-day seminar is designed to provide participants with the knowledge and skills to effectively manage and monitor a health and safety management system. This workshop will focus on the organization and maintenance of safety program documentation and how to implement and maintain a continuous improvement cycle.

Duration: 4.0 hours
Associate Member: $45.00
Member: $30.00
Non-Member: $80.00

Workplace Safety and Health Legislation requires a Prime Contractor to be designated on all construction projects where more than one employer or self-employed person(s) are involved in work on site at the same time. The Prime Contractor is granted overall responsibility to ensure compliance with WSH regulations at the worksite. Worksite activities need to be coordinated so that the work of one employer does not create unsafe conditions for the workers of another employer on the site. CSAM’s Prime Contractor course will focus on providing companies with effective guidelines to assist them in fulfilling their responsibilities. This course will examine a Prime Contractor’s legislated requirements and focus on developing practical methods to meet these requirements.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit

Duration: 8.0 hours
Associate Member: $160.00
Member: $130.00
Non-Member: $190.00

Duration: 16.0 hours
Associate Member: $320.00
Member: $260.00
Non-Member: $375.00

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $25.00
Member: $25.00
Non-Member: $25.00

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $300.00
Member: $200.00
Non-Member: $525.00

The Principles of Safety Management training course teaches how to create a company safety manual and provide practical guidelines to keep your safety program running smooth and effective.

Duration: 16.0 hours
Associate Member: $170.00
Member: $120.00
Non-Member: $320.00

This program enables managers and supervisors to build health and safety into their everyday planning and make them a daily part of their supervisory function. Communication skills are emphasized and practiced in this course. All LSE course dates will take place over two consecutive days. (i.e. November 6 & November 7)

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Duration: 8.0 hours
Associate Member: $120.00
Member: $85.00
Non-Member: $160.00

All participants receive a certificate of training and a wallet-sized card upon successful completion. Learn to think, react and improvise in emergency situations from the world leader in first aid, the Canadian Red Cross. The employer, owner, or general contractor is responsible for providing and maintaining first aid services, equipment and supplies in accordance with the first aid requirements stated in the Workplace Safety and Health Act and Regulations.

Duration: 8.0 hours
Associate Member: $85.00
Member: $60.00
Non-Member: $160.00

Prerequisites: One of either Principles of Safety Management or Simplified Safety is required prior to registering for Safety Auditor Training

Audits assess the current state of an organization’s safety program and identify specific areas of improvement. They also support companies who believe they are ready to be independently audited to achieve COR™ Certification. Participants will learn the simplicity of the audit and how to use standardized forms. Also, they will gain experience working with the three verification techniques to assist in the conclusion: documentation, observation and interviews.
Course Content
• Introduction (course objectives)
• Auditor and the audit process
• Effective communications
• Report building
• Legislation review
• Workshop audit (classroom) – student must complete an internal audit before receiving certification
• Close out meeting of workshop audit